product solutions


Single-phase Pole-mounted Distribution Transformer


Product Overview
The single-phase pole-mounted distribution transformer adopts high quality silicon steel sheet iron core, mounted on the pole,which have small size and small infrastructure investment.The transformers reduce the length of the low-voltage distribution line, reduce the loss of line of more than 60%.The series of transformers are specifically designed for the decentralization distribution network of servicing residential overhead distribution loads of town and countryside. They are also suitable for light and diversified power applications. 
  • Main Features
  • The main Function
  • Technical Parameters

    • It can be used as a single phase transformer separately ,and three single phase transformers can be also connected together ,working as a three phase transformer .

    • Quick and easy installation

    • Beautiful appearance 

    • Excellent insulation and sealing system

    • Higher reliability 

    • Lower operating cost 

    • Reduce the length of the low-voltage distribution line, reduce the loss of line of more than 60%,improve the quality of power supply.

    • Cover mounted high voltage porcelain bushings with eyebolt terminals are mounted on flat  embossments on the cover and have undercut gasket seats for improved sealing. The eyebolt connectors are cast bronze plated with tin to accommodate both aluminum and copper conductors.

    • One-piece fasten ring prolongs the life of the transformer, facilitates inspection and maintains even pressure around the entire rim. It combines with a specially formed tank rim, drawn cover and gasket to form an effective seal which will not deteriorate with age.

    • Low voltage tank-wall bushing terminals are clamp type and tinplated.

    • Tank is equipped with self-sealing pressure release device.

    • Support lugs, welded to the tank, conform to ANSI standards are made of hot-rolled steel.

    • Tank is supplied with a tank grounding bolted ring-type connector suitable for use with copper or aluminum.

    • Frequency: 50 or 60 Hz

    • Capacity Range: 5~500 kVA

    • Primary Voltage: 2.4-36 kV

    • Secondary Voltage: 120-600 V

Return Feedback